G100 intelligent controller

G100 intelligent controller, products made in the UK. Excellent quality, good reputation.

The G100 is a universal pressure or temperature input intelligent controller with one or two configurable alarms and an optional linear re-output for outputting process variables. The G100 intelligent controller is combined with a GREFF high temperature melt pressure sensor for extrusion system applications.

Ordering Guide

Dimensions

Technical parameters

G100 Smart Controller Product Specifications

Output Configuration: 1 or 2 relay outputs with optional linear re-output

Alarms: 2 process high/low alarms with adjustable hysteresis

Display Values: Process variables, minimum value, maximum value

Temperature Units: °C/°F

Human-machine interface: 3 button operation, 4-digit 13mm high display, red, green, or red/green (color changes when an alarm occurs), plus 1 setpoint and 2 alarm indicator lights

Output terminals: 0~20mA, 4~20mA, 0~10V, 2~10V, 0~5V Accuracy: Accuracy of 0.25% and 0.5%

Input thermocouple: J, K, C, R, S, T, B, L, N

RTD: 3-wire PT100, max 509 per wire (balanced)

Bridge configuration: 4 or 6 wires (6-wire requires internal shunt correction switch)

Bridge excitation: 10V ±7%

Bridge sensitivity: 1.4–4 mV/V

Input signal range:  -25% to +125% of full scale (approximately -10 mV to +50 mV), with the calibration switch between the CAL2 and CAL1 terminals.

Display scalable:  1999 to 9999, with adjustable decimal point

Input impedance: Thermocouple and mV range >10M9, V range 47K9, mA range 59

Accuracy: ±0.1% of input range ±1 LSD (T/C CJC better than 1°C)

Sampling: 4 times per second, approximately 14-bit resolution (250ms sampling time)