1.High temperature melt pressure sensor/transmitter
Accuracy class: 0.5%
Output signal: 4-20mA (2-wire), 0-5V (4-wire), 2.0mV/V (4-wire)
Temperature measuring element: J thermocouple, K thermocouple, PT100 thermal resistance (3-wire)
Mounting thread: M18*1.5-6g, M14*1.5-6g
Measuring range: 17.5bar, 35bar, 50bar
Rigid rod length: 152mm, 6.0 "(standard); 203mm, 8.0 "; Special customization
Flexible tube length size: no flexible tube; 457mm, 18.0 "(standard); Special customization
Diaphragm material: 15-5PH stainless steel, Hastelloy alloy, inconel718 alloy or special custom
Filling medium: standard alloy liquid or special alloy liquid
Electrical connection: 6PIN (standard), 7PIN or 8PIN
2.Industrial pressure sensor/transmitters
Product type: S24 hexagonal (pressure drawing hole), S27 hexagonal (pressure drawing hole), flat film type or special custom
Pressure unit: bar, MPa, psi
Pressure range: pressure range value X
Process connection: G1/4, 1/4NPT, M20*1.5
Output signal: 4~20mA (2 lines), 4~20mA+HART (2 lines)
Electrical connections: Small Hersman connection, M12*1 four-pin circular connector, Packard connector
Material requirements: SUS304 stainless steel, SUS316L stainless steel
Sealing method: standard end seal, end seal with pressure damper, 45° taper seal, ED ring seal
Accuracy level: 0.5, 0.25
3.Temperature sensor
Measuring medium: measuring material, can determine the shell material, diaphragm material, with or without explosion-proof, lightning protection and so on
Temperature measuring element: single, double
Temperature measurement point: single/double grounded, single/double insulated
Case diameter: 6.0mm, 8.0mm, 10.0mm or customized
Temperature probe form: perforated, slotted, special customization
Installation interface: M12*1, M12*1.5, G1/2, special customization
Junction box type: B-Kopf, K-Kopf, A-Kopf or direct outlet X meters
Direct outlet type: stainless steel glass wire, PTEF stainless steel glass wire or special custom
Direct outlet tail processing: pin type cold terminal terminal, U-type cold terminal terminal, 3PIN snap power connector, 5PIN snap power connector or special custom
Optional analog signal: 4-20mA
Measuring range: Maximum measuring temperature unit ° C
4.Vortex flowmeter
Nominal circulation:
Pipe type: 10, 15, 25, 32, 40, 50, 65, 80, 100, 125, 150, 200, 250, 300, 350, 400, 500
Plug-in: DN200-DN3000
Material: Sensor and housing: 304 (1Cr18Ni9Ti); Fran: Carbon steel, stainless steel
Measured medium: liquid, gas, saturated steam, superheated steam
Nominal pressure: Pipe type: 2.5MPa; Plug-in type: 1, 6MPa
Accuracy level: liquid 1; Gas and steam class 1.5 (for insert type only refers to measuring head accuracy)
Medium temperature: -20~+100℃; -20~+280℃; -20~+350 ° C (Max. 500 ° C)
Ambient temperature: on-site liquid crystal: 0~+50℃; Pulse signal formula: -20~+70℃
Signal output: 4-20mA (two-wire system); Low level ≤1V, high level ≥5V (three-wire pulse)
Communication protocol: RS485 (Modbus); Hart protocol
Explosion-proof grade: Battery power: Exia II BT4; 24VDC power supply: Exia II BT5
5.Drop type liquid level gauge
Product type: Standard type input level, anti-corrosion type input level, explosion-proof type input level
Pressure unit: mH2O, KPa
Pressure range: pressure range value X
Process connection: input level, threaded connection, flange connection
Output signal: 4~20mA (2 lines), 0~10V (3 lines), 0~5V (3 lines)
Material requirements: SUS304 stainless steel, PTFE PTFE material, SUS316L
Accuracy level: 0.5 (standard accuracy level), 0.25
6.Displacement sensor
Product type: pull rod linear displacement, slider linear displacement, micro pull rod linear displacement, micro self-restoring linear displacement
Effective travel: 100mm, 200mm, 300mm, 1250mm, special customization
Signal output: Resistance signal, (0~5) DVC, (-5~5) VDC, 4~2mA (2 wire), 4~2mA (3 wire), special customization
Electrical connection: Direct outlet, H2 Hersman connector, H3 Hersman connector, special custom
Cable length: 1000mm, 2000mm, 5000mm, special customization
Tie rod head form: standard universal joint, extended universal joint, fisheye universal joint, level 0.25
7.Blasting switch
Product type: Standard structure, alarm structure
Pressure range Bar: 100, 200, 350, 400, 500, 600, 700, 800, 1000
Process connection: 1/2-2UNF-2A, M14*1.5-6g, M18*1.5-6g
Rigid rod length: 152mm, 6.0 (standard); 203mm, 8.0 "; 254mm, 10.0"
End locking method: external hexagonal, milling hexagonal, slot type, external hexagonal +1/4NPT thread interface
Length of alarm wire: X m
8.Intelligent pressure and temperature controllers
Instrument type: 96*48, 48*96, 96*96
Power supply: 85~265VAC, 24VDC
Pressure range: XMPa
Input signal: mV/V, V, mA
Temperature input type: J, K, E, PT100
Output: 2 relay output 4~20mA transmission output, 2 relay output 0~10VDC transmission output, 2 relay output RS-485 communication
